SABRENT 4-Drive M.2 NVMe to PCIe 3.0 x4 Adapter Card, RAID/JBOD (EC-P3X4)

SABRENT 4-Drive M.2 NVMe to PCIe 3.0 x4 Adapter Card, RAID/JBOD (EC-P3X4)

• FOUR NVMe SSDs IN ONE PCIe SLOT | Add up to four M.2 NVMe SSDs to your desktop or workstation with a single x4 PCIe 3.0 adapter card. The package includes everything necessary including M.2 screws and a screwdriver. Installation is simple and easy.
• READ THIS BEFORE YOU BUY - HOW MANY DRIVES YOU WILL SEE | Whether your system detects all four SSDs depends on your motherboard's PCIe port-splitting (bifurcation) support and its BIOS settings, not on this card. Check your motherboard manual before ordering. This card contains no drives and no onboard PCIe switch - SSDs are sold separately.
• BUILT FOR SOFTWARE RAID AND JBOD | Present your drives to Windows or macOS for software RAID or JBOD storage pools - scratch disks, media caches, editing volumes and bulk project storage. There is no hardware RAID controller on this card, so array setup happens in your operating system.
• COOL AND DEPENDABLE UNDER LOAD | Cool your drives efficiently with the included aluminum heatsink. Integrated silicone thermal padding helps maximize heat dissipation so that your drives never throttle. The housing also adds structural support to the adapter card for more protection.
• FITS OLD AND NEW SYSTEMS, M-KEY ONLY | Fits in x4, x8, and x16 PCIe slots and is backward compatible with PCIe 2.0/1.0 at respective maximum bandwidths - an effective way to add NVMe storage to older systems. Supports a PCIe maximum payload size of 512 bytes, ASPM power states (L0s/L1/L23/L3) with L1 sub-states, S3/S4 sleep, LTR, AER and SRIS. Supports M-Key NVMe SSDs ONLY - does NOT support B-Key or B&M-Key SSDs. Windows 8.1+ and macOS 10.3.3+. Backed by SABRENT support - visit us to register your product.