FUNSHOWCASE Resin Shaker Molds Set Charms Pendant Jewelry Making Supplies 9 Silicone Trays with 5 Clear Seal Films

Dimension (approximate):
Unicorn_6.7x5cm
Celestial globe_6.3x5.2cm
Bird head gun_6.3x5.9cm
Dessert cart_6.2x5.6cm
Ice cream truck_7x5.8cm
Star drift bottle_6.3x4.9cm
Ice cream cup_7.2x4.2cm
Video camera_6.5x6cm
Round magical bottle_6.4x4.2cm
Sealing films_13x9.5cm, thickness around 0.25mm (peel the cover before use)

Mold color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Can be used with dishwasher/oven/refrigerator

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food

More Tips to use with Epoxy Resin:
1) Poured in silicone molds in layers, allowing air bubbles completely escape;
2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.
3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.
4) Do not use water-base ink for resin casting.
5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.
6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.