RIIEYOCA OBD2 Power Cable for Dash Cam,90 Degree Right Angle USB C to OBD-II Hardwire Adapter with Switch Button Connector Plug and Play 24 Hours Surveillance/Acc Mode (11.5FT/3.5M)

RIIEYOCA OBD2 Power Cable for Dash Cam,90 Degree Right Angle USB C to OBD-II Hardwire Adapter with Switch Button Connector Plug and Play 24 Hours Surveillance/Acc Mode (11.5FT/3.5M)

• The RIIEYOCA OBD2 to USB C power cable, a reliable obd2 dash cam power cable, provides a stable and reliable power supply for dash cams. This dash cam hardwire kit USB C simplifies installation by eliminating the need to plug the dash cam into the ignition socket. Note!!! This OBD power cable is only suitable for fuel vehicles, please identify carefully before purchase.
• This obd power adapter for dash cam, an obd usb c adapter, features 2 working modes: Mode ["O"]: ACC mode, when your car is turned off, the OBD power cable for dash cam will also power off after 20 minutes. Mode ["—"]: Monitor mode, when ACC is off, the OBD power cord will continue to work until the car battery voltage is detected to be 11.6v (low voltage), and then power off after 5 minutes.
• Low Voltage Protection Mode ["—"]: The OBD cable for dash cam, which is an obd2 usb c adapter, monitors the car battery power in real time. When the car battery level drops to the low voltage protection value, the cable automatically enters low voltage protection and shuts down the output, protecting your car from battery depletion so that you have enough voltage to start the car for the next drive. NOTE: The RIIEYOCA OBD power cord is only for dashboards in the 11.6V-36V range and does not support other voltage ranges.
• The RIIEYOCA OBD2 power cord for dash cam, a durable obd dash cam usb c cable, features a 90-degree design that reduces wire damage and extends the life of the power cable. Installation is simple: plug the cable into the vehicle's OBD2 port and connect the other end to the dashboard. This obd2 power adapter has a USB-C port. Please select the power cable you need.
• With ACC Mode Input 12.8V-36V/Output: 5V/3A and Monitor Mode Input 11.6V-36V/Output: 5V/3A, this dash cam power adapter includes an extension cable 3.5 meters (11.5 feet) long.