RIIEYOCA OBD Power Cable for Dash Cam, Mini USB to OBD-II Hardwire kit Adapter with Switch Button Connector, 24 Hours Surveillance Mode/Acc Mode (11.5FT/3.5M)

RIIEYOCA OBD Power Cable for Dash Cam, Mini USB to OBD-II Hardwire kit Adapter with Switch Button Connector, 24 Hours Surveillance Mode/Acc Mode (11.5FT/3.5M)

• Compatibility: This OBD2 power cord detects whether the vehicle is started by vibration, so both gasoline vehicles and new power vehicles can use this OBD power cord
• Easy to install: The cable simplifies the installation of the tachograph and can plug and play. And it can be hidden for beautiful wiring. You can use the switch to choose two different operating modes for the tachograph
• Mode: ["O"]: The vibration of the vehicle triggers the power supply, and the OBD2 line automatically stops the power supply after the vehicle stops and is delayed for 20 minutes.(Input: 12.8V-36V; output: 5V / 3A)
• Mode: [" - "]: 24H continue parking monitoring, power supply after the car stopped until the car battery is lower than 11.6 V and the OBD2 cable cuts the power supply after stops automatically after a delay of 8 seconds (input: 11.6V-36V; output: 5V / 3A)
• Low voltage protection: The OBD line has a built-in MCU intelligent control chip, which can detect the car battery power in real time. When the car power drops to the low voltage protection value of the OBD line, the OBD line automatically enters the low voltage protection and turns off the output