RGBZONE 5V USB LED Controller, 21-Key RF Wireless Remote Control for Strips

RGBZONE 5V USB LED Controller, 21-Key RF Wireless Remote Control for Strips

• 5V USB LED controller support WS2811 WS2812B LED LED lights. It can’t control SK6812 RGBW LED lights and regular RGB LED without driver IC. 300+ kinds of color modes, such as rainbow, wave, breathing, stropping, gradual change, color cycle, comet, static, fading, chasing, which are vivid and beautiful. Color changing speed and brightness are adjustable.
• Come with 3pin JST connector and USB female connector. Support all the 3 PIN Single signal IC chip LED product. The remote can match only one receiver. Just plug and play. No soldering is needed. Save user setting automatically when power off. It can adjust the Color order RGB GRB BRG etc. .When you press Green, the LED is red. This is not the quality problem, please read the user manual and set it correctly.
• 32-98FT(10-30M) long distance wireless RF remote control. mini size, convenient to use. DC 5V input(Only 5V available). But it can’t regulate the output voltage.Please choose power supply according to your led lights, not the controller. For example, DC5V WS2812B LED Strip ,must use DC5V power supply.【Input 5 voltage=output 5 voltage.】
• The controller contains coin cell batteries. RF remote. If controller is very hot during use, please give the light strips with a separate power supply, or with the use of amplifiers.
• Support setting controlled pixel number. Maximum number of control pixels: Total 2048pixels (Controller factory default 300 pixel points). Recommand use 300 pixel (Approx. 5 meters of light strip length.) The product itself can carry power 5V<30W, such as more than this power, please give the light strips with a separate power supply, or with the use of amplifiers, otherwise it will lead to controller overload damage.