RAINPAL RBS050 Brass Rain Barrel DIY Spigot(Unibody Design)
Product Description
RAINPAL RBS050 Brass Rain Barrel DIY Spigot(Unibody Design)
- Contain less than 0.25% Lead. Lead Free Compliant
- Simple Unibody design, easier to install and more reliable, no thread tape needed. Drill 1-7/16 to 1-1/2 inch diameter hole to install.
- To install: Remove handle, remove nut, insert spigot, install nut, install handle.
- Flow opening: 10mm. Flow Rate: 4GPM with 2 ft water. Fit up to 3/8" thickeness wall. Weight: 9.1oz
Contain less than 0.25% Lead. Lead Free Compliant. California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Technical Specifications
You might also like
RAINPAL Rain Barrel Linking/Link/Connector Kit (Two Brass Bulkhead Tank Fittings and One 8 inch hose) (RBL020)
Oatey Mystic Rainwater Collection System Fits 2" X 3" Residential Downspouts
RAINPAL RBD020 Rain Barrel or Bucket Brass Drain/Flush Port Kit
RAINPAL BBF020 Brass Bulkhead Tank Fitting (1/2 inch Female Pipe and 3/4" Male Garden Hose Threaded) (4)
Rain Barrel Screen: 6 inch - Aluminum - Installs in Minutes - Keep Mosquitos and Debris Out Of Your Rain Barrel - Never Rust
RAINPAL RBI125F Rain Barrel Inlet Adapter(2" Fine Thread Bung Cap to 1-1/4" Barbed Fitting)
RAINPAL RBS005 Brass Water Container/Rain Barrel Quarter Turn Spigot(Lead Free Compliant)
RAINPAL BBF020 Solid Brass Bulkhead Tank Fitting (1/2 inch Straight Female Pipe and 3/4" Male Garden Hose Threaded) (1)
RAINPAL BBF020 Solid Brass Bulkhead Tank Fitting (1/2 inch Straight Female Pipe and 3/4" Male Garden Hose Threaded) (2)