PureSec 1/4 inch RO Tubing Cutter 3/8 inch Airline Cutter 5/16 inch Plastic Hose Cutter 1/2 inch Pipe Cutter to Prevent Leakage

"Our TC01 tube cutter is a must buy for tubing that fits into quick disconnect conectors that need a clean flat cut and create a leak-free connection.It had a sliding lock to keep it closed when not in use and a little fork on the back end of the handle which is designed for pushing down on pushlock fittings to release the plastic tubing.

" Why you need it?

As with quick connect connections, a clean, straight cut tube inserted firmly and all the way in results in leak free connections.This tool combined with firm insertion and elbows where needed will ensure leak free connections. You may can also use razor knife or side cuts. But a razor knife is great at cutting them but the risk of cutting yourself is also great. Using side cuts smashes the tubing before it actually cuts it and the cut is not that clean which will cause problems when you try to out it in the fitting.

Where to use it?

Our TC01 tube cutter is for cutting soft and hard Nylon /Rubber/ vinyl /Poly /PVC/ PU Plastic Air line&Pipe&Drip Tubing & Hose. Cutting Outer Dia: 1/4" or 3/8" OD PE Tubing or Other Pipe or Hose OD ≤12mm. It is perfect for the soft plastic tubing and a little difficult and needed more power for hard plastic tubing.

How to use it?

When turning upside down, a little bolt will lock the cutter in closed position. You can unlock by rotating again by 180 degrees. Make sure your tube is sitting correctly and you'll get a clean and square cut every time.

What you will receive?

TC01 Tube cutter x1