PoE Texas 4-Port Active Mode A PoE+ Injector, 48V 60W Supply
Product Description
PoE Texas 4-Port Active Mode A PoE+ Injector, 48V 60W Supply
Add gigabit PoE to any 10/100/1000 capable network switch or router
Injects power and data on to one Ethernet cable
Power up to 4 devices with 60 watts combined total power
Mix and match devices
IEEE 802.3at compliant for Class 4 PoE Devices
4 data in, 4 Data + PoE out ports
Extends power up to 328 ft (100 meters)
Active autonegotition - power is off until a compatible device is connected
48 volt, 60 watt power supply included - 110 to 220 volt AC operation - 90% efficient - UL, DoE, CE and FCC listed
Description
This device provides power and data over one Ethernet cable using pins 1,2 and 3,6. Active autonegotion protects non-PoE devices and will provide data only if plugged in. If power is needed, your powered device will receive 48v. The AT-4-48v60w can support a combined power total of 60 watts for all devices on all 4 ports with a maximum output of 30 watts per port. Check device specifications for power needs. For up to 120 available watts see the AT-4-48v120w or the AT-4-56v120 for up to 120 watts of power.
Applications:
WiFi Access points like Cisco, Meraki, Aruba 802.11ac
IP Cameras like Hikvision
PoE Texas' Gigabit "GAT" and "GAF" PoE Splitters (see below)
Any IEEE 802.3af or 802.3at Device
Compatible PoE splitters sold by PoE Texas
GAT-USBC
GAT-5v20w - Product Line
GAT-12v25w - Product Line
GAF-5v10w - Product Line
GAF-Lightning-PD - 5v Power + Data
AF-Lightning
GAF-MicroUSB
GAF-USB
GAF-12v9w
GAF-12v12w
AF-Huddlecam








