Plug-in LED Light Sensor Pir Infrared Motion Sensor Night Light Lamp, Qook 2-in-1 Motion Detector Activated Dusk-to-Dawn LED Light Auto-on for Indoor Nightlight, Cold White
Product Description
Plug-in LED Light Sensor Pir Infrared Motion Sensor Night Light Lamp, Qook 2-in-1 Motion Detector Activated Dusk-to-Dawn LED Light Auto-on for Indoor Nightlight, Cold White
- MOTION SENSOR: PIR Motion Sensor Lamp activated on within 13-16 feet, Auto-off after about 30-60 seconds of no motion detected.
- LIGHT SENSOR: When the light becomes dark, the light sensor lamp according to ambient illumination lights up, and shut down at daylight automatically. So this dusk to dawn sensor night light prevent the light from turning on during daylight hours, energy saving.
- Automatic switch: In darkness environment, the PIR motion sensor lamp and the light sensor night lamp can interchange automatically, when someone walks into sensor area, the PIR motion sensor lamp will light up, and the light sensor lamp will shut down, and after the PIR motion sensor lamp shut down, the light sensor night lamp will light up again.
- Easy to use: Plug in Sensor night light can install to AC outlet directly, no need battery.
- Broad Application: You can use this LED plug in motion sensor night light in Bedroom, Laundry Room, Hallway, Basement, Stairwells, Kitchen, Nursery Etc.
Product Introduction
The sensor lamp have two functions. PIR motion sensor Lamp and Light sensor night Lamp.
The lamp has a photosensitive internal switch that only allows the light to be activated on when the ambient light is low or dark. At this time this light will light up automatically if the infrared detector patter. such as when someone walks into its area of detection. The light will stay on for about 30-60 seconds after the infrared detection ceases.
According to the light of environment adjust the light of the lamp. When the light becomes dark, night lamp will light up automatically. When the light becomes bright, night lamp will shut down automatically.
The lamp do not work when the illumination over 7 Lux.
This device can be used in Corridors, wash rooms, Front door, Cloak Rooms, Warehouses, Basements, Garages, Driveways, Security Areas, etc.
Specification
Working voltage: 100-120V
Power: 2W, Staitc power:






