Pentair Pentek WP.5BB97P Big Blue Sediment Water Filter, 10-Inch, Whole House Polypropylene String-Wound Filter Cartridge, 10" x 4.5", 0.5 Micron

Pentair Pentek WP.5BB97P Big Blue Sediment Water Filter, 10-Inch, Whole House Polypropylene String-Wound Filter Cartridge, 10" x 4.5", 0.5 Micron

Product ID: B0030ZD7MU Condition: New

Selected Option: 1 Count (Pack of 1) 0.5 Micron
Variations
$ 152
includes Duties & VAT
Delivery: 10-20 working days
Ships from USA warehouse.
Secure Transaction
VISA Mastercard ozow

Product Description

Pentair Pentek WP.5BB97P Big Blue Sediment Water Filter, 10-Inch, Whole House Polypropylene String-Wound Filter Cartridge, 10" x 4.5", 0.5 Micron

  • KEEP YOUR WATER CLEANER - Reduces fine sediment down to 0.5 micron, including rust, sand, and scale particles, so cleaner water reaches every tap while helping protect your appliances and downstream filters.
  • DURABLE STRING-WOUND DESIGN - Fibrous polypropylene string is precision-wound around a rigid polypropylene core for high dirt-catching capacity and strong flow rates with minimal pressure drop.
  • WELL AND MUNICIPAL WATER READY - Durable 100% polypropylene media suits both well and city water and offers broad chemical compatibility for a wide range of residential, commercial, and industrial uses.
  • FITS 10-INCH BIG BLUE HOUSINGS - Sized 10" x 4.5" to drop into any Big Blue or heavy duty whole house housing and replace most 10-inch sediment cartridges, handling high flow at under 5 psi at 10 gpm.
  • ECONOMICAL SEDIMENT REDUCTION - An affordable string-wound solution for high-sediment water; replace every 6 months, or sooner when you notice a drop in water pressure or water quality.

This Pentek WP.5BB97P string-wound polypropylene filter cartridge reduces fine sediment, rust, and scale particles for municipal drinking water and industrial fluid applications. It has a nominal filtration rating of 0.5 micron at an efficiency of 85%. The filter is made of polypropylene fiber cord that is wound in a precise pattern on a rigid polypropylene core for greater surface area, providing a higher dirt-loading capacity than standard wound cartridges. It has an initial pressure drop of less than 5 pounds per square inch (psi) at a maximum flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 165 degrees F (4.4 to 74 degrees C). This string-wound filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.

SpecificationsNominal filtration rating0.5 micronInitial pressure drop at 10 gpm5 psiTemperature range40 to 165 degrees F (4.4 to 74 degrees C)Maximum dimensions (H x W)9-7/8 x 4-1/2 inches (251 x 114 mm)

The nominal filtration rating is for a particle removal efficiency of 85%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Technical Specifications

Country
USA
Brand
Pentek
Manufacturer
Pentair Industries
Binding
Kitchen
PartNumber
355212-43
Model
WP.5BB97P
Color
White
Height
5
Length
10
Weight
1.3
Width
4.47
ReleaseDate
2017-11-25T00:00:01Z
Size
1 Count (Pack of 1)
NumberOfItems
1