Pentek 150164 - #10 Standard Blue Housing w/pr (3/4" Valve-In-Head)

Pentek 150164 - #10 Standard Blue Housing w/pr (3/4" Valve-In-Head)

• CLEANER WATER WITH BUILT-IN SHUTOFF - This 10-inch valve-in-head housing holds a cartridge that reduces sediment, dirt, sand, rust and silt, and its internal valve shuts off both inlet and outlet with a half turn of the handle
• NO EXTERNAL SHUTOFF VALVES NEEDED - The valve-in-head closes both ports together so you can change cartridges without separate plumbing valves, and self-cleaning radial O-rings help keep the seal leak-free each time it is used
• NSF CERTIFIED AND CHEMICAL COMPATIBLE - Tested and Certified by NSF International to NSF/ANSI Standard 42 for material and structural integrity, with an opaque reinforced polypropylene build and a pressure relief button on the inlet side
• FITS STANDARD CARTRIDGES - With 3/4-inch NPT inlet and outlet ports, the housing accepts a wide range of 2-3/8 to 2-7/8 inch diameter cartridges and measures 12.50 by 5.13 inches for under-sink, countertop and RO use
• WHAT TO KNOW BEFORE YOU BUY - Rated to 125 psi and 40 to 125 degrees F; cartridge, filter wrench and mounting bracket are sold separately and not included, and the housing should be protected from freezing to avoid cracking