PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Suitable for Signal Interface Switching for PLC or Other Industrial Control(PWM-to-Voltage 0-10V) (2)

PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Suitable for Signal Interface Switching for PLC or Other Industrial Control(PWM-to-Voltage 0-10V) (2)

• Convert 0-100% PWM digital signal into analog signal, Input 0-100% PWM signal of 3.3V level, output 0-10V voltage.
• Module Working voltage: 15-30V DC (power requirement of power supply: >100MA), PWM signal receiving frequency range: 100HZ-3KHZ (1-3KHZ is recommended).
• Widely used in signal interface switching of PLC, single chip or other industrial control board.
• Under the module size, easy to use in different places. Embedded microcontroller technology. Easy to operate, you can fine-tune the potentiometer.
• Compact size, Model: 3.3P-5V, Input 0-100% PWM signal of 3.3V level, output 0-10V voltage, Insert the jump pin at 5V, the module is easy to use in different places.