PAC SWI-RC-1 Universal Analog/CAN-Bus Steering Wheel Control Retention Interface with DIP Switch Programming for Most Late Model Radios with 3.5mm Jack or Two Wire Connections, Plug & Play Install

PAC SWI-RC-1 Universal Analog/CAN-Bus Steering Wheel Control Retention Interface with DIP Switch Programming for Most Late Model Radios with 3.5mm Jack or Two Wire Connections, Plug & Play Install

• ??????? ?????????????: Works with over 3000+ vehicles equipped with data steering wheel control (SWC) systems including CAN-Bus, GMLAN, Class II, LIN-Bus, IBUS, ACP, PCI, or analog resistive SWC systems. Vehicle MUST have factory steering wheel controls in order to use SWI-RC-1.
• ????? ?????????????: Works with most late model radios equipped with 3.5mm jack or two wire connections. See compatibility disclaimers below¹⁻⁷.
• ????? ??? ???? ???-?????????? ?????? ????????: Utilize the DIP switch selection for easy setup. Also supports classic SWI-RC style button programming and customizable button functions (e.g., short press/long press/button reassignment).
• ???????? ????? ??????? ?????????: Retains SWC functions. Vehicle MUST have factory steering wheel controls in order to use SWI-RC-1.
• ?????? ????????????: Before installing, use the SWI-RC-1 web app and confirm the latest firmware has been downloaded for trouble-free functionality. Follow the prompts using the web app for fast setup.
• ???????? ?-??? ??? ????????? ??????: Saves you the time of hunting around for this important radio connection.
• ¹Aftermarket radio MUST be equipped with wired remote input (3.5mm headphone style jack or blue/yellow wire) to be compatible (e.g., a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you must use SWI-X. ²Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5. ³Clarion model CZ500 does not support remote Bluetooth controls. ⁴JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls.
• ⁵Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer. ⁶Pioneer radios with Bluetooth feature, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio not the SWI-RC. There is no correction for this unless it comes from Pioneer. ⁷Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH and the AVIC-X920BT, X930BT, X940BT will support the Voice Recognition function via wired remote input.