Odashen String Trimmer Head Replacementfor Craftsman Wc2200 Ws205 Ws215

Odashen String Trimmer Head Replacementfor Craftsman Wc2200 Ws205 Ws215

• Trimmer head with Orange Bump Knob fits for Craftsman Wc2200 Ws205 Ws215. Confirm your shaft type: Your trimmer model uses a 7/8" square shaft (threadless), and this trimmer head’s inner bore is designed to fit this standard.
• Compatibility note: The orange knob + square shaft bushing is the standard configuration for your model, so no extra washers or adapters are needed.
• Pre-installation check Verify that the inner bore at the bottom of the trimmer head has square notches to align with the output shaft. It should slide directly on. If it feels too loose or tight, check for plastic burrs inside the bore and trim them gently with a knife.
• Secure the trimmer head Slide the head onto the shaft. Hold the trimmer head steady and turn the trimmer shaft counterclockwise (or turn the trimmer head clockwise) until it is fully tightened. After installation, wiggle the head by hand to confirm there is no play or movement.
• Package Contents: 1 x Trimmer Head with two Bump Knob.