O'SKOOL Drill Press Table with Adjustable Aluminum Fence and Flip Stop

O'SKOOL Drill Press Table with Adjustable Aluminum Fence and Flip Stop

• Expanded Work Support: This drill press table adds a 23-5/8 x 15 x 1 in MDF surface over an existing cast-iron table, providing more room to support and position wood workpieces during drilling
• Reposition the Drill Press Fence with More Control: Low-friction tape reduces direct contact between the 23-1/2 in aluminum fence and MDF surface, while the guide bar and bearings help guide movement during adjustment
• Set Repeated Hole Locations with Less Re-Measuring: Use the insert reference line to relate the fence to the drill-bit position, then set the flip stop as an end reference for similar workpieces
• Clamps And Replaceable Insert: Two 15 in T-tracks position the included 0–2-1/2 in hold-down clamps. Replace the worn 4 x 4 x 3/8 in sacrificial insert with 3/8 in plywood or MDF, then use the four leveling screws to set it flush
• Clamps And Replaceable Insert: Two 15 in T-tracks position the included 0–2-1/2 in hold-down clamps. Replace the worn 4 x 4 x 3/8 in sacrificial insert with 3/8 in plywood or MDF, then use the four leveling screws to set it flush