OMRON E3Z-LS61 2M Distance-settable Photoelectric Sensor (Pre-Wired Type)(Sensing Distance 20 to 200 mm)(NPN) NN

[Sensing method] Distance-setting
[Sensing distance] 20 mm to 200 mm
[Setting range] 40 to 200mm
[Differential distance] 10% Max. of setting distance
[Reflectivity characteristic (black-white error)] 10% Max. of setting distance
[Light source] Red LED (Emission wave length: 680nm)
[Power supply voltage] 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
[Current consumption] 30mA DC Max.
[Control output]Output type: NPN open collector output
Load current: 0 to 100 mA
Residual voltage: (DC) 1 V Max. (Load current 100mA Max.)
[Operation mode] Light-ON/Dark-ON selectable
[Load power supply voltage] 26.4 VDC Max.
[Protective circuit] Surge suppressor
Output short-circuit protection
Power supply reverse polarity protection
Mutual interference prevention
[Response time] 1ms Max.
[Sensitivity setting] 5-turn endless adjustment
[Insulation resistance] 20 M OHM Min. at 500 VDC between charged parts and the case
[Dielectric strength] 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
[Degree of protection] IEC60529: IP67
[Applicable standard (EC Directive (Low Voltage Directive))] EN60947-5-2
[Applicable standard (EC Directive (EMC))] EMI: EN60947-5-2
Emission Enclosure: EN55011 Group 1 class A
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
[Conformed standard (EC Directive (CE marking))] Equipped
[Connection method] Pre-wired models (Cable length: 2 m)
[Indicator] Operation indicator(orange), Stability indicator(green)
[Weight (packed state)] Approx. 65 g
[Tightening torque] 0.5 N.mMax. (with M3 screw)
[Accessories] Instruction manual