NANROBOT D4+max Scooter NFC Display-Scooter Frame Numbers Start with ZNR

NANROBOT D4+max Scooter NFC Display-Scooter Frame Numbers Start with ZNR

• The M5 display screen is universal, but the P0 and P1 values need to be changed. For a 52V scooter, P1 is changed to 43, and for a 48V scooter, P1 is adjusted to 42. P0 is based on the tire size. Please see the main picture for details.If you don't understand something, you can consult us.
• D4+2.0/3.0/N6-M5/Lightning central display: The connector with the white arrow is connected to the wiring harness and the other connector is connected to the throttle.
• *Starting from November 2024, the N6 72V/LS7+72V display will be changed to 4 wires and the throttle will be changed to 1 wire. If you buy a new display but use an old throttle, just connect one wire of the throttle to the display, leave the other wire empty, and connect the 3 instrument wires to the wiring harness
• Note: Please select the appropriate accessories based on your specific scooter model. Although the old displays for LN 1.0, D6+ 1.0, and D4+ 2.0/3.0 look similar, they are not universal. Additionally, the N6 NFC display screen comes in two distinct interface versions: Waterproof 4-Wire and Waterproof 5-Wire. These two versions are not interchangeable. Please carefully verify your existing display's wiring specs before placing an order.
• Note: The D4+max has two display versions: one with NFC and one without. You can also distinguish them by their VIN number. VINs starting with HNR are for the non-NFC version, and those starting with ZNR are for the NFC version.