Midwest Hearth Adjustable Rod and Valance Kit for Fireplace Spark Screens

Features:

• All-steel construction.
• Powder-coated finish provides durability and heat resistance.
• Valance hides screen rod and rings.
• Expands to fit multiple fireplace widths.
• Smooth black finish compliments many fireplace styles.
• Made in the USA by expert craftsmen.

Compatibility:

• For use in masonry fireplace openings.
• Fits opening sizes from 36" wide to 48" wide.
• Select a screen size 2" shorter than fireplace opening height to accommodate top valance kit and bottom clearance.

Included:

• 1 Center valance
• 2 Expansion valance pieces
• 2 Rods to hang screen
• 4 Masonry screws
• 1 Instruction Sheet

Tools Needed:

☑ Screwdriver
☑ Tape Measure
☑ Pencil
☑ Power drill
☑ Masonry drill bits

Installation Overview:

• Measure fireplace opening to find center - mark with pencil.
• Hold valance in place and mark location of central screw-holes with pencil.
• Drill pilot holes then mount central valance with provided screws.
• Extend expansion bracket to side of fireplace. Mark location of screw-hole, drill pilot hole, then secure bracket with screw.
• Repeat with expansion bracket on other side.
• Install your 1st fire screen on rod. Thread pointed end of rod through first skipping first ring which will later be used to secure screen to side.
• Insert screen and rod through central rod holder.
• Secure bent end of rod through the bracket (tab with hole) at the end of valance kit.
• Make sure final screen ring is placed on the other side of tab so it won't slide towards center.
• Repeat for other side