Micro Motor Warehouse NanoQX Motor Set, 6x15mm coreless (fast) CL-0615-14

Motors come with plugs and correct wire length (7cm) for the Nano QX.

--> Installation instructions!

CL-0615-14: High performance motors for the Blade Nano QX.

Skill level: intermediate to expert

If you are comfortably flying your Nano QX and want more power - this is the motor for you. 
The CL-0615-14 is a powerful little beast - be careful with the throttle!

Warning: These motor will turn your nQX into a pocket rocket, and it will not like hovering!
Depending on the battery you use, you will see varying degrees of oscillations (wobble) during hover and slow flight in SAFE mode. Agility mode does not have this problem, and all you need to do to get around this in SAFE mode: throttle up!

If you are learning or just prefer slow flying, you should look at the CL-0615-11 instead.

 performance data:

• speed: 14.000Kv
• operating voltage: 1.5-3.7V
• max. thrust: 15g (direct drive)
• 1.0A load current at 3.7V  (direct drive)

dimensions:

• can diameter: 6mm
• can length: 15mm
• shaft diameter: 0.8mm
• shaft length: 5mm
• weight: 1.8g 
• wire length: 70mm
• plug: Micro-JST-1.25

All motor packs contain equal amounts of clockwise and counter clockwise motors. To maximize performance and life span, don't run them in reverse! 

Motor rotation and correct polarity is indicated by the wire color:
clockwise: red +, blue -
counter clockwise: white +, black -

Please note: wire color coding is reversed from the stock motors. (Blade has decided to code their motors differently to everyone else in the industry..) Please click here for installation instructions!