Metal Glue, Heavy Duty Waterproof Epoxy Welding Adhesive, 80 ml

Metal Glue, Heavy Duty Waterproof Epoxy Welding Adhesive, 80 ml

• HEAVY-DUTY LIQUID WELD FOR RIGID REPAIRS: This 2-part metal epoxy glue bonds aluminum, steel, stainless steel, cast iron and other rigid surfaces, including wood, ceramic, glass, concrete and rigid plastics. Ideal for automotive parts, tools, equipment, plumbing repairs and everyday workshop projects where a strong, durable bond matters
• 5-MINUTE SET, 24-HOUR FULL CURE: Strong enough to rebuild, not just stick: Mix equal parts A and B at a 1:1 ratio until uniform. The epoxy begins to set in about 5 minutes and reaches full cure in 24 hours, forming a hard gray repair with up to 4680 PSI strength. Once fully cured, it can be sanded, filed, drilled and painted for a cleaner finished repair
• MADE FOR TOUGH CONDITIONS: Built for heat, water, oil and demanding environments. Once fully cured, the bond is waterproof and oil resistant and performs from -65°F to 548°F. A practical choice for garages, workshops, outdoor equipment, automotive components, tools and other repairs exposed to changing temperatures and harsh working conditions
• CONTROLLED 1:1 MIXING, LESS MESS: Designed to make two-part epoxy easier to use. The dual-barrel package and pusher help dispense equal amounts of Parts A and B, while the included wooden mixing stick and mixing board make preparation simple and controlled. The kit also includes disposable gloves, so you have the basic tools needed to start the repair right out of the box
• BETTER PREP, STRONGER REPAIR: A lasting repair starts with the surface: Roughen the area, remove dirt, oil and moisture, mix Parts A and B thoroughly, apply the epoxy and keep the repair aligned while it cures. Allow a full 24 hours before heavy use, sanding or drilling. Not recommended for PE, PP, PTFE, silicone, rubber, flexible materials, moving joints or pressure-critical repairs