Meshnology GC2145 2MP DVP Camera Module, 160° Fisheye, 2-Pack

Meshnology GC2145 2MP DVP Camera Module, 160° Fisheye, 2-Pack

• DVP PARALLEL INTERFACE: Built for compatible ESP32 and STM32 hosts with DVP camera capture, helping you add a compact 2MP camera to embedded vision projects. This 2-pack includes camera modules only; select a matching host controller, driver, and FPC/pinout for your build.
• 160° FISHEYE VIEW: Capture more of a robot vision, IoT, or embedded imaging scene in one frame with the 160° wide-angle lens. Fisheye distortion is expected with this field of view; choose a 90° or narrower lens when your project needs a lower-distortion image.
• 2MP OV2640 ALTERNATIVE: Move to a 2MP-class GC2145 option for compatible DVP projects that use a supported GC2145 driver. GC2145 outputs RGB, YUV, or RAW data; unlike OV2640, it has no hardware JPEG encoding, so JPEG applications may need software encoding or code changes.
• RASP BERRY P I INTERFACE NOTICE: This DVP camera module does not connect directly to native Rasp berry P i 15-pin or 22-pin MIPI CSI camera ports. A Rasp berry P i project needs a separate DVP-to-MIPI bridge and custom driver porting; choose a compatible DVP host for direct use.
• HOST SETUP CHECK: Ar duino GIGA R1 and Portenta configurations can be considered when hardware DVP capture and firmware support are verified. Standard Uno, Nano, and Mega boards cannot directly drive a DVP camera module; confirm your host interface, driver, cable, pinout, and image workflow before ordering.