Merax Finiss 26" Aluminum 21 Speed Mountain Bike with Disc Brakes(Fashion Gray&Green)

NOTICE

Rotate the fork a full 180-degree before assembling the front wheel (after proper rotation, the brake will be at the front of the bike)

1. Assemble the front wheel with quick-release pin, no tools needed.

2. The left and right side pedal threads are not the same and should be assembled on its corresponding side. L/R signs are marked on the spindle of the each pedal. Make sure they are assembled on the correct side (when you ride the bike, left pedal should be on your left hand side, right pedal on your right hand side). The right side pedal has a right-hand thread (installed clockwise, removed counterclockwise). The left side pedal has a left-hand thread (installed counterclockwise, removed clockwise).

Thread both pedals into the crank arms as far as you can by hand, and then fully tighten them with the wrench. If the pedals are not fully tightened, they may become loose and damage the threads. We will NOT be responsible for such damages.

3. Assembly and Tuning Required

This bicycle arrives 85% assembled. You will need to install the pedals, front wheel, handlebar and fill the tires with air.

4. Please MAKE SURE to refer to the link below before purchasing the bike: http://www.merax.com/helpcenter.html

Please kindly note that the standard weight capacity for this particular bike design is 330 lbs. However, in order to ensure long-term usage, a lower weight limit is stated on the package (220 lbs).

Specifications

Frame: 6061 Heat Treated Aluminum

Fork: Suspension Fork Alloy 80mm Travel

Shifters: Shimano EF51 21 Speed

Wheels: Double Wall Aluminum Rims

Rear Derailleur: Shimano RD-TZ50

Front Derailleur: Shimano FD-TZ30

Crank: Aluminum Triple 42/34/24

Brakes: Mechanical Disc

Brake Levers: Shimano Aluminum

Seatpost: Aluminum w/ clamp 31.8 M8*60MM

Handlebar: Aluminum

Pedals: Aluminum 9/16"

Number of Speeds: 21 Product weight: 33 lbs

Frame size: 19"