Meikuler 13.56MHz Cards, RFID Smart Card / M1 Card, ISO14443A Printable Blank RFID PVC Cards for Access Control, Hotel Key cads, etc (200)
Product Description
Meikuler 13.56MHz Cards, RFID Smart Card / M1 Card, ISO14443A Printable Blank RFID PVC Cards for Access Control, Hotel Key cads, etc (200)
- –– 13.56MHz; 1K Byte Memory; ISO14443A
- –– Blank white cards, Compatible with RC522 and PN532 readers. Works with KABA,SAFLOK,MIWA AND ONITY LOCKS.
- –– Function: Read/Write protect by password, program mable via mifare-compatible readers using crypto1 authentication.
- –– All cards are pre-programmed with a unique ID, 4 Byte UID. And the 4 Byte UID is NOT changeable, factory default key: FF FF FF FF FF FF
- –– Note 1: Card must be encrypted before use, Otherwise, it cannot be used –– Note 2: NOT compatible with HID VingCard or SaltoCard or Amiibo locks.
- –– Card size: 85.5mm(L) x 54mm(W) x 0.8mm (Thickness); Each card individually packaged. Each card individually packaged, printable on all plastic card printers such as Zebra, Fargo, Evolis, Datacard and Magicard Not compatible with INKJET printers
Product Details:
-- Chip: MIFARE Classic 1K
-- Blank white cards, (no printed numbers, no magnetic strips and no slots or holes)
-- Function: Read/Write protect by password
-- Frequency: 13.56MHz
-- Memory: 1K Byte Card
-- dimensions: 85.5mm(L) x 54mm(W) x 0.8mm (Thickness)
-- Thickness: 0.8mm Material: PVC
-- Surface: lamination (gloss)
-- Scope: access control, elevator, attendance
-- Card reading distance: 2.5-10cm (Depending on the card reader)
-- RF Protocol: ISO 14443A Data storage time: minimum 10 years
-- Each card individually packaged, printable on all plastic card printers such as Zebra, Fargo, Evolis, Datacard and Magicard Not compatible with INKJET printers
-- Works with RC522 and PN532
-- Works with KABA,SAFLOK,MIWA AND ONITY LOCKS.
-- NOT compatible with HID, VingCard and SaltoCard or Amiibo locks.
