Manual Leather Splitter, Leather Paring Skiving Skiver Machine with Clamp

Manual Leather Splitter, Leather Paring Skiving Skiver Machine with Clamp

• WHAT YOU WILL GET: A leather peeling machine, a fixed clamp, 30 sharp blades, 4 screws, and 2 L-key, 2 instruction manuals. Made of stainless steel, this leather crafting tool is hard, not easy to rust, and can be used for a long time.
• EASY TO OPERATE: The leather thinning machine is a manual operation, which needs to manually pull the material for peeling. The adjustment range of the fixed clamp is 5-38mm. You can use the fixed clamp to fix the leather thinning tool on any desktop that does not exceed this thickness. Our leather skiving tools set comes with an instruction manual that teaches you step-by-step how to use this tool, even beginners can learn it quickly.
• ADJUSTABLE THICKNESS: There are screws on both sides of the leather skiver tool to adjust the thickness of the thinning. You can freely adjust the thickness to what you want.
• WIDELY USED: The leather splitter machine is vegetable leather tanned leather, chrome-tanned leather, etc. You can use this leather thining tool to cut watch straps, belts, or whatever leather you want to thin. This leather thinning tool is not suitable for leathers wider than 8cm/3.15 inches.
• TIPS: Softer leather can be cut thinner than harder leather, and soft leather can be thinned down to 1mm. But too soft leather is not easy to operate. Leather with moderate hardness and sufficient grease is easy to operate. If you are a beginner, it is recommended that you choose leather with appropriate hardness when using it, such as vegetable-tanned leather.