MakerFocus 3.7V 10000mAh Lithium Polymer Rechargeable Battery 1pcs

MakerFocus 3.7V 10000mAh Lithium Polymer Rechargeable Battery 1pcs

• Safety and Reliability: Our product utilizes a cutting-edge, A-grade lithium battery system. Compared to others, it offers superior energy capacity and density, along with more stable discharge performance and an extended lifespan. Additionally, it meets the stringent UN 38.3 safety standards, ensuring both safety and reliability
• Charging Method: It is recommended to charge with a current of 2A, charging to 4.2V with constant current, converting to constant voltage charging when charging to 4.2V, and finally setting at 0.02C cut-off current of 200mA, at which time the battery is fully charged. Charging with currents and voltages higher than recommended may cause problems with the battery's charging, discharging, mechanical and safety performance, and may cause heat generation or fluid leakage
• Discharging: The discharge current must not exceed 5A, and the battery must be discharged within the ambient temperature range of 0℃~60℃. High current discharge will cause a sharp decrease in the battery cell capacity and cause overheating
• Widely Application: Equipped with PH2.0 plug, these 10000mAh batteries can be used for Raspberry Pi Battery Pack UPS and Other
• Storage: When the battery is not used for a long time, it may be in a certain over-discharge state due to its self-discharge characteristics. To prevent over-discharge, the battery should be charged regularly to maintain its voltage between 3.7V and 3.9V; over-discharge will lead to loss of battery performance and battery function