MXDFL Clock Mechanism Replacement, Quartz Movement with Hands and Motor Kit

MXDFL Clock Mechanism Replacement, Quartz Movement with Hands and Motor Kit

• Dimensions: 1/4 in (6 mm) thread length, 45/64 in (18 mm) overall shaft length. I Shaft - Hour hand shaft (round) diameter 13/64 in (5.0 mm); "I" shape (oblong) minute hand shaft 1/8 in * 5/32 in (3 mm * 4 mm); Without second hand shaft; Thread diameter 5/16 in (7.6 mm). If your original mechanism has a 1/4 in (6 mm) thread length and with I shaft, we suggest that you simply select the same size.
• Clock Dial Compatibility: This short shaft clock mechanism fits thin panels precisely. The maximum compatible clock dial thickness is 1/8 in (3 mm). Recommended for clock panels with thickness between 1/32 in - 1/8 in (1 mm - 3 mm). For panels thinner than 1/32 in (1 mm), use more rubber washer or other gasket to add thickness for a secure fit. If your panel exceeds 1/8 in (3 mm), you must choose a longer shaft mechanism. Please carefully measure your dial thickness with a caliper before ordering to avoid returns.
• Critical 1/8 in (3 mm) Safety Rule: The mounting hardware requires 1/8 in (3 mm) of thread length to fully engage and secure the movement. Therefore, the thread must be at least 1/8 in (3 mm) longer than your panel thickness. This mechanism has a 1/4 in (6 mm) thread - after subtracting the 1/8 in (3 mm) safety margin, the maximum panel thickness is 1/8 in (3 mm). If your clock panel exceeds 1/8 in (3 mm), the tighten hex nut will not reach the threads and your mechanism will not stay in place.
• I Mounting Hole Compatibility: This high torque clock movement replacement kit is designed for clock hands with I mounting hole. Hour hand mounting hole (round) 13/64 in (5.0 mm); Minute hand mounting hole (oblong) 1/8 in * 5/32 in (3 mm * 4 mm); Without second hand. If you want to reuse your own clock hands, you must ensure that their mounting holes fit MXDFL high torque clock mechanism shaft size listed above. Using incompatible hands will cause loose fit or installation failure. Our clock movement kit comes with 4 set of small clock hands. These hands work perfectly for 5-1/4 in - 6 in (133 mm - 152 mm) small wall clock, desk clock, mantel clock, bedside clock, and mini clock.
• What You Get: 3x high torque clock mechanism, 4x clock hands, 3x movement metal hanger, 3x rubber washer, 3x brass gasket, 3x brass hex nut, 3x brass closed end nut, protected in a sturdy reliable PET plastic jar, guidance for use. Whether you are hunting a top-tier battery clock replacement mechanism for clock repair, a seamless clock motor replacement for worn-out clock kits for do it yourself, or a fully-loaded battery powered clock mechanism to build your dream timepiece, our versatile solution has you covered! Supports analog clock making supplies, build a clock works and desk clock repair kit. Ultimate choice for diy clock kit, custom clock & reviving beloved timepieces!
• All-In-One Clock Mechanism Replacement Kit: This accurate timing clock hands and motor kit doubles as a diy clock building kit and quartz clock repair parts, including durable clock hardware, smooth clock arms, reliable battery clock mechanism, and all essential clock parts. Designed for hobbyists and pros alike, it works as a clock movements battery operated clock mechanism replacement, and silent clock mechanism (featuring a continuous sweep, non ticking, silent clock for bedroom quietness and peaceful spaces), fitting large wall clock, desk clock, table clock, mantel clock, grandfather clock, 3d printed clock, epoxy resin clock, and even cuckoo clock.