MIXC 1/4" Irrigation Dripline Tubing with Built-In Emitters, 100 Ft Roll

MIXC 1/4" Irrigation Dripline Tubing with Built-In Emitters, 100 Ft Roll

• 【Built-In Emitters, Less Assembly】 This 100 ft roll of 1/4" irrigation dripline tubing has 0.5 GPH emitters pre-installed every 6 inches, so separate drippers do not need to be added along the line. Cut, connect and route the tubing to build watering zones around your planting layout.
• 【Save Up to 80% Water with Root-Zone Irrigation】 By releasing water slowly near the plant base, the dripline is designed to use up to 80% less water than traditional hand watering or overhead sprinklers by reducing overspray, runoff and evaporation. Actual savings vary by layout, pressure, schedule, weather and growing conditions.
• 【Plan Runs for More Consistent Flow】 Keep each dripline run up to 19 ft to support more consistent output, then create additional branches as needed. Actual flow can vary with inlet pressure, elevation, run length and the number of active branches; check the farthest emitter before finalizing the layout.
• 【Fittings for a 1/2-Inch Mainline】 Includes 1 six-way quick connector, 10 1/4-inch barbed couplings and 10 goof plugs for closing line ends or correcting holes. A 1/2-inch mainline and water-source connection hardware are not listed as included.
• 【Cut-to-Length Garden Layouts】 The black PE tubing can be cut and routed for beds, rows, pots, window boxes and greenhouse layouts. Cut squarely, insert each barbed fitting fully and test every connection while monitored before unattended watering; avoid pulling or sharp bends at joined sections.