MIKKUPPA KQ033 (CA9360) Engine Air Filter Replacement for Toyota Camry, Highlander, Sienna, Solara | Lexus ES300, ES330, RX330, RX350
Product Description
MIKKUPPA KQ033 (CA9360) Engine Air Filter Replacement for Toyota Camry, Highlander, Sienna, Solara | Lexus ES300, ES330, RX330, RX350
- More than 98% efficiency in stopping dust
- Treated filter material for better capacity and efficiency
- Mikkuppa recommends that you replace this filter every 15,000-30,000 miles, depending on your vehicle model.
- Auto List: Replacement for 02-06 Toyota Camry / 07-11 Toyota Camry Hybrid / 01-13 Highlander / 04-10 Sienna / 04-08 Solara, 02-03 Lexus ES300 / 04-06 ES330 / 04-06 RX330 / 07-09 RX350(See Amazon Part Finder for fitments to your cars)
- You have to breathe fresh, clean air to be at your best. And so does your engine—that’s why a clean air filter is so important.
Better Performance & Efficiency
Mikkuppa air filter improves the quality and quantity of clean air entering the engine, this improves the engine performance and efficiency. Studies have shown that fuel economy can be improved by 14% with a clean air filter.
Fitment Vehicle Reference
- LEXUS
- 2002-2003 ES300
- 2004-2006 ES330
- 2004-2006 RX330
- 2007-2009 RX350
- TOYOTA
- 2002-2006 Camary
- 2007-2011 Camary Hybrid
- 2001-2013 Highlander
- 2004-2010 Sienna
- 2004-2008 Solara
Extended Engine Life
Regularly changing the air filters is an inexpensive way to extend the life of an engine. Small particles of dust or sand can cause damage to internal parts such as pistons and cylinders.
Specifications
Dimensions: 12.52 " x 7.58" x 1.69"
Improved Performance
Dirty air filters will not allow the same amount of air to the engine as a clean one would. An engine restricted of air will suffer from a loss of performance and consume more fuel.
Installation Instructions
1. Use proper protective gear.
2. Loosen wing nut or other fasteners to remove filter cover.
Remove old air filter.
3. Clean filter cover and housing using a shop vacuum.
4. Install new air filter. Be sure it is sealed around the perimeter.
5. Replace cover and fasten.









