MD Building Aluminum Flat Bar, Mill Finish, 3/4in x 1/8in x 48in
Product Description
MD Building Aluminum Flat Bar, Mill Finish, 3/4in x 1/8in x 48in
- Aluminum
- Use for general indoor or outdoor projects
- 3/4 in. x 1/8 in. x 48 in.
- Mill
- Flat Bar Profile
- Rust and Corrosion Resistant
- Use sheet metal screws to attach to other materials
- Caution sharp edges
- Use a hacksaw or a cardbide-tip steel cutting blade (not included)
- Paintable
Aluminum Flat Bars from M-D Building Products are produced to extremely close tolerances to assist with all different applications. Cut to desired length and shape as desired. Great for scratch builders, modelers, machine shops, and architectural applications.
Technical Specifications
You might also like
M-D Building Products 60699 3/4-Inch by 1/16-Inch by 48-Inch Flat Bar Mill
M-D Building Products 60772 1/2-Inch by 1/8-Inch by 48-Inch Flat Bar Mill
M-D Building Products 60855 Angle Equal Leg Mill
M-D Building Products 60749 Mill
RMP .125 3003 H14 Aluminum Sheet 12" x 12"
Remington Industries 21SNSP.25 Magnet Wire, Enameled Copper Wire, 21 AWG, 4 oz, 100' Length, 0.0296" Diameter, Red
8"X12" 1/8" ACRYLIC MIRROR PLEXIGLAS SHEET
M-D Building Products 60863 Mill
WEN 4208 8 in. 5-Speed Drill Press
Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long (Pack of 1)