Tools & Home Improvement > Hand Tools > Crimpers

Malco C5A2 Impact Power Assisted Crimper

Product ID: B01H1N3AA0 Condition: New

Available in other options.

View variations

$ 576

includes Duties & VAT

Delivery: 10-20 working days

Ships from USA warehouse.

Secure Transaction

VISA Mastercard ozow

Product Description

Malco C5A2 Impact Power Assisted Crimper

78% FASTER THAN MANUAL CRIMPING, VERIFIED IN ACTUAL FIELD TRIALS: Malco field-tested the C5A2 against manual sheet metal crimpers and clocked it at 78% faster, roughly five times the speed of doing it by hand. On a residential installation where you're crimping round duct collars all day, that time difference is real money. Chuck it into your impact driver and you're crimping in seconds, not minutes.
IMPACT DRIVER ONLY, NOT COMPATIBLE WITH STANDARD DRILLS: The C5A2 is designed exclusively for impact drivers. It will not work with a standard cordless drill or drill/driver. Requires a minimum 12V DC cordless or maximum 7 amp AC corded impact driver with a 1/4-inch quick-release hex chuck. If you have a standard impact driver already on your belt this chucks straight in and works immediately.
CRIMPS 30–24 GAUGE ROUND DUCT, SPIRAL DUCT & BLACK STOVE PIPE WITH NO ADJUSTMENT BETWEEN SIZES: The C5A2 handles 30 to 24-gauge (0.41–0.71 mm) galvanized steel round duct and 30 to 24-gauge (0.31–0.61 mm) cold rolled black stove pipe (including spiral duct) without changing settings between sizes. Walk the crimper around the pipe circumference in a controlled motion and you're done. Multiple sizes, types, and thicknesses, one attachment, zero setup.
SOLID BLOCK CONSTRUCTION WITH HARDENED STEEL DRIVE SHAFT — COMPACT ENOUGH FOR A TOOL POUCH: Durable solid block body, hardened steel drive shaft, and smooth working mechanisms built for the rotational forces of an impact driver. Easy to balance while crimping in any position; overhead, on the ground, or working a collar in a tight mechanical room. When you're done, it fits in a standard tool pouch or bag without taking up dedicated space. Replacement drive shaft available separately (SKU: C5A2RD).
NO SETUP. NO ADJUSTMENT. CHUCK IT IN AND CRIMP: There's nothing to configure, calibrate, or adjust before your first use. Chuck the 1/4-inch hex shaft into your impact driver, position the TurboCrimper on the duct edge with the seam closed, trigger gently, and walk it around the circumference. Works in forward and reverse. Left-hand or right-hand friendly.

The Malco turbo crimper impact is a simple, compact accessory that works exclusively with the power assistance of impact Driver technology to safely and efficiently crimp 30 to 24 gauge (0.41 to O.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove pipe. The turbo crimper impact does not require set-up or adjustment. Just chuck the 1/4 inch power groove drive shaft to your cordless or corded (min.12 volt DC / max. 7 amp AC) impact Driver to immediately begin crimping multiple sizes, types and thickness of pipe and duct, including spiral duct, fast and easy. With the pipe or duct Seam in closed position, start the crimp to one side of the Seam by gently tugging on the Driver trigger and angling the turbo crimper impact onto the metal edge. Walk the Crimper around the pipe circumference in a controlled manner and then angle the Crimper off the metal as the Crimper approaches the other side of the Seam. The turbo crimper impact is five times faster than a manual crimping tool based on Actual Field trials! it is comfortable for any operator to maneuver and, lefties take Note, it works with the impact Driver in forward or reverse. The handy little turbo crimper impact is a Must-Have accessory for every HVAC installer and easily stores in a ready tool pouch or bag when not in use.