Linear Gate Receiver,Number of Channels 1 MCS109950-1 Each

The Linear 12-24V Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is a 3-foot coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver. The Receiver is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters. The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp at 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals. The receiver is programmed with a coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator. FEATURES: Operates on 12-24 volts AC or DC power. Whip antenna. 3-foot antenna coax and bulkhead connector. 1,024 codes. RF frequency: 300 MHz or 310 MHz (jumper selectable). TYPE: 1-Channel. NOTE: This Gate Receiver is compatible with Multi-Code and Stanley transmitters only.