Large Kitchen Sink Rack with Strainer, 25.9"L X 13.9"W Stainless Steel Sink Protector Grid with Rear Drain Hole for Single Bowl

Large Kitchen Sink Rack with Strainer, 25.9"L X 13.9"W Stainless Steel Sink Protector Grid with Rear Drain Hole for Single Bowl

• IMPORTANT SIZING GUIDE – Please Read Before Ordering:
• ⚠️ 1. Measure Accurately – Do Not Guess Always use a physical measuring tape or ruler. Avoid estimating sizes visually or using everyday items (plates, trays, phones, etc.) as references, as this often leads to incorrect measurements and a poor fit.
• ⚠️ 2. Measure the Inside Base of Your Sink Check the bottom interior dimensions of your sink (not the top opening). Measure about 1 inch above the base where the rack will be placed.
• ⚠️ 3. Leave Adequate Clearance This rack’s outer dimensions are 25.9"L x 13.9"W. For a proper fit, we recommend at least 0.5” of extra space on all sides. For the size rack (25.9" X 13.9"), your sink’s base should measure at least 26.5" x 14.5".
• ⚠️ 4. Check for Sloped or Curved Sink Walls Some sinks (especially porcelain or older designs) have walls that slope outward, making the top wider than the base. Ensure your sink’s bottom area (where the rack sits) meets the required dimensions.
• If you receive cracked products or you are not satisfied with our products , please feel free to contact our customer service. We will provide the best solution for you within 24 hours.