LED Light Package for Caterpillar 994F Loader - LED Retrofit/Fitout – (18) LEDP10W-50E (10) LEDP10W-
Product Description
LED Light Package for Caterpillar 994F Loader - LED Retrofit/Fitout – (18) LEDP10W-50E (10) LEDP10W-
- Produces 4 360 lumens of light while drawing only 50W @4.2 amps from a 12 V electrical system.
- They produce a 20 degree spread spot beam approximately 525†long by 75†in width.
- Also available in floodlight versions with a 40 degree beam to provide more light over larger area.
- Can connect an external dimmer switch or pulse control & adjust the perceived output of the light.
Buy American Compliant The LLP-CAT-994F LED Light Package comes with 4 LEDP10W-50E-S 4" Square Spot LED Work Lights 14 LEDP10W-50E-F 4" Square Flood LED Work Lights and 10 LEDP10W-1R-F 2" Round Flood LED Pod. The LLP-CAT-994F LED Light Package is ideal for a wide variety of uses including equipment vehicle military law enforcement and industrial manufacturing applications. Each LEDP10W-50E produces 4 300 lumens and the LEDP10W-1R-F produces 860 lumens of light output with low voltage and amp draw a 50 000 hour rated service life and 9 to 46 volt compatibility provides operators with a versatile and powerful LED lighting solution. The LEDP10W-50E-S and the LEDP10W-50E-F LED lights from Larson Electronics produce 4 300 lumens of bright light while drawing only 50 watts @4.2 amps from a 12 volt electrical system. Five CREE XLamp MC-EÂ ten watt LEDs producing 860 lumens each are paired with high purity optics to produce a 20 degree spread spot beam approximately 525 long by 75 in width. Ten floodlights with a 40 degree beam spread to provide more light over a larger area nearer the fixture making these flood versions ideal for use as work lights. These LED light bars are waterproof to 3 meters sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments conditions and applications. The LEDP10W-1R-F LED light emitter from Larson Electronics produces 860 lumens of bright light while drawing only 10 watts @1/4 amp from a 12 volt electrical system. A single CREE XLamp MC-EÂ 10 watt LED producing 860 lumens is combined with high purity optics to produce a 20 degree spread spot beam approximately 280 long by 60 in width. We also offer floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture making flood versions ideal for use as work lights. This particular unit is ultra compact at only 2 inches in OD (outer diameter) by 2 inches tall by 2.5 inches







