2 Pack Garage Door Torsion Spring Winding Rods with Non-Slip Handle, Black

WARNING: INCORRECT INSTALLATION OR DOOR POSITION CAN CAUSE INJURY.

Product Description
Use for unwinding and winding torsion springs.
Torsion spring winding rods is constructed and appearance galvanized of hard drawn wire and come in 1/2", outside diameters about 18" lengths and non-slip handles prevent accidents.
Failure to use these rods when replacing or making adjustments to torsion springs may result in personal injury and property damage.
When adjusting or replacing garage door torsion springs, it is important that these tasks are not attempted with any other tools other than with these rods
Winding rods which are designed specifically for increasing (winding) and decreasing (unwinding) the tension on garage door torsion springs, and they are the only tools recommended for this purpose.

Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Professional installation is recommended. Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed.