KP184 DC Electronic Load Battery Capacity Tester Internal Resistance Tester

KP184 DC Electronic Load Battery Capacity Tester Internal Resistance Tester

• KP18 series electronic load can be widely applied to product testing and ageing in LED lighting, power source, charger and accumulator
• The current mode can be used for simulating resistive load to discharge the battery and load the power source, the voltage mode can be used for simulating capacitive load and load the charge, as well as simulating the constant voltage of LED and load the power source
• It is used simply, adjusted conveniently and has perfect protection function
• The performance and function are unmatched by traditional slide wire resistor
• Note: about the BNC interface function, please know the follow function of BNC before you use this Extended function. If the voltage measurement is selected as the remote measurement (VOLTAGE REMOTE SENSE) in the menu settings, the BNC connector on the front panel must draw two wires to the positive and negative terminals of the measured voltage, otherwise the voltage measurement and display There will be inaccuracies in the error, especially when the load is loaded