KNACRO 2-Channel 24V Relay Module High Low Level Triggering Optocoupler Isolation Load 10A DC 30V AC 250V for PLC Automation Control, Industrial System Control

Using patch optocoupler isolation, drive ability, stable performance; trigger current 5mA;
Normally open interface Maximum load: AC 250V / 10A, DC 30V / 10A;
Module operating voltage :DC 24V ;
Module can be set by Jump cap high or low level trigger;
Fault-tolerant design, even if the control line off, the relay will not move;
Power indicator (green), relay status indicator (red);
All interfaces can be directly connected through the terminal lead;
Module size: 50 * 41 * 18.5mm (L * W * H);
With 4 fixed bolt holes, spacing 44.5mm * 35.5mm;

Module Interface:
1, DC +: then the power supply positive (voltage according to the relay requirements, with 5V.12V and 24V choice);
2, DC-: connected to the power supply negative;
3, IN1: 1 signal trigger side, you can set the high or low level control relay pull;
4, IN2: 2-way signal trigger side, you can set the high or low level control relay pull;
Relay output:
1, NO1: 1 relay normally open interface;
2, COM1: 1 relay common interface;
3, NC1: 1 relay normally closed interface;
4, NO2: 2 relay normally open interface;
5, COM2: 2 relay common interface;
6, NC2: 2 relay normally closed interface;

Technical Parameters:
Relay version: 24V;
Quiescent current: 5mA;
Maximum current: 50mA;
Trigger current: 2-4mA;
Trigger voltage (low level): 0-8V;
Trigger voltage (high level): 8.5-24V;
High and low trigger select side:
1.S1 for 1-Channel relay high and low trigger selection;
2.S2 for 2-Channel relay high and low trigger selection;
3.COM and LOW connection, the corresponding relay is low-level trigger, COM and HIGH-side connection is high when the trigger.

Package Included:
1*DC24V 2-Channel Relay Moudle