KNACRO 3.3V 0-100% PWM to 0-10V Conversion Module Digital to Analog Module PLC Industrial Interface Conversion Module
Product Description
KNACRO 3.3V 0-100% PWM to 0-10V Conversion Module Digital to Analog Module PLC Industrial Interface Conversion Module
- The PWM digital signal is converted to 0-10V analog signal. Can be used for PLC or other industrial control panel of the signal interface switch.
- PWM signal receiving frequency range: 1KHZ-3KHZ;
- PWM signal input level range: 4.5V to 10V level, jump cap plug in the 5V, the level of the signal is mainly for conventional industrial control card (such as MACH3 board), 5V CPU interface; 12 to 24V level, jump cap inserted at 24V, the level of the signal is mainly for conventional PLC interface.
- Power input range: 12V-30V.
- By adjusting the potentiometer on the board, you can match the PWM signal pulses at different frequencies.
The PWM digital signal is converted to 0 to 10V analog signals. Can be used for PLC or other industrial control panel of the signal interface switch.
Parameter:
PWM signal reception frequency range: 1KHZ-3KHZ.
PWM signal input level range:
4.5-10V level, jump cap plug in the 5V, the level of the signal is for conventional industrial control card (such as MACH3 board), 5V CPU interface;
12-24V level, jump cap inserted at 24V, the level of the signal is mainly for conventional PLC interface
Power input range: 12V-30V
Mounting fixed: 4 * M3 screw hole.
Other functions:
1. Power supply has anti-power supply.
2. Power on the power indicator light.
3. By adjusting the potentiometer on the board, you can match the PWM signal pulses at different frequencies.
Package Included:
1*PWM To 0-10V Conversion Module
Technical Specifications
You might also like
Makerfire 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New
KNACRO PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Suitable for Signal Interface Switching for PLC or Other Industrial Control(PWM-to-Voltage 0-10V)
uxcell R28 15mm x 30mm Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC
ECO-WORTHY CNC Z-Axis Tool Setting Touch Plate Probe Compatible with Mach3 and Other Router Mill
KNACRO PWM-to-Voltage Module 0% -100% PWM Converted to 0-5V 0-10V Voltage Analog to Digital