K2 Home Tech - Gledopto Zigbee LED Strip Controller ZLL RGB+CCT 1 ID C-008 C008 Works with Your Zigbee Hub and App, Controls 6 Wire LED Strips for RGB Cool White and Warm White

How to install GLEDOPTO 2.4G Wireless RGBW LED controller :

1. Power your light source

2. Set up your bridge

3. Download the your bridge app and connect to your bridge

4. Play around and experience light in ways you had never imaged

How to reset the controller:

1.Switch on your device.

2.Now switch off and on within 2 seconds.

3.Repeat off/on four times.

4.Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

How to make a difference between 1ID and 2 ID ZIGBEEE RGBCCT LED Controller:

The 1ID controller shows up as one light in the Philips Hue app. This means that it can be controlled as being one light just in the same way as a regular Philips Hue light strip. This is convenient when using it with voice control (Alexa/Google Home). The disadvantage is that you cannot turn on both the colored LEDs and the White LEDs at the same time.

The 2ID controller shows up as TWO lights in the Philips Hue app. This is different from a regular Philips Hue light strip. The advantage of this is that you can turn on both the colored AND the white LEDs at the same time, allowing for more light output and control of saturation. The disadvantage is that it can be inconvenient when using voice control (Alexa/Google Home) as you need to control two separate lights.

Note: The 2 ID RGB+CCT ONLY Works with the bridge & app from Philips Hue

Specifications:

Size: 23.5*48*89mm

Input voltage: DC12~24V

Working Temp: -20°C~60°C

Output Current: 6 A max

Total Current: 15 A max

Protection Rate: IP20

Fireproof material and press type design.

Package Included:

1 x Wireless RGBCCT LED Controller

1 x User Manual

Product Description:  

2.4G Wireless RGBW LED controller