JVCC AF22-BLK Matte Black Aluminum Foil Tape – 2 mil Linered, Non-Reflective, 59 oz/in Adhesion, Flame Retardant, Light Control Aluminum Tape for Can Lights, Barn Doors & Production Sets
Product Description
JVCC AF22-BLK Matte Black Aluminum Foil Tape – 2 mil Linered, Non-Reflective, 59 oz/in Adhesion, Flame Retardant, Light Control Aluminum Tape for Can Lights, Barn Doors & Production Sets
- PRODUCTION SET & LIGHT CONTROL: Our black foil tape conforms and adheres directly to light fixtures, barn doors, and heat-generating equipment to block light spills on set. The go-to for gaffers and lighting directors on TV, film, music video, and live performance stages.
- MATTE BLACK, ZERO-REFLECTION FINISH: This non-reflective matte black aluminum tape absorbs ambient light instead of bouncing it back. Stays invisible under camera and stage lighting, even when wrapped directly on hot can lights or fixtures in frame.
- FLAME RETARDANT, BUILT FOR HOT FIXTURES: Flame retardant high heat tape is safe for large can lights, Fresnels, PARs, and hot production equipment where standard tape fails. 59 oz/in adhesion, 25.7 lb/in tensile strength.
- PAPER LINER FOR CLEAN, FAST APPLICATION: White paper release liner keeps acrylic adhesive clean for controlled application under pressure. Malleable foil conforms instantly to curved housings and fixture edges without lifting or bridging.
- BEYOND STAGE LIGHTS & BARN DOORS: Masks stray light on projectors, flags, and grip equipment. Seals light leaks on blackout panels and camera housings. Available in 2 in. x 27 yds.
JVCC AF22-BLK Matte Black Aluminum Foil Tape is a matte-black non-reflective aluminum foil tape coated with a pressure-sensitive acrylic adhesive. The tape comes on a white paper release liner. The tape features a malleable foil which confirms well to irregular and curves surfaces. Its aggressive adhesive provides quick, positive grab. AF22-BLK is great for temporary light control as the tape easily confirms and adheres to light fixtures and/or barn doors. It has a mate black finish that does not reflect light, but absorbs light from ambient light sources. The tape performs well at both low and elevated temperatures and is flame retardant. It is primarily used in the entertainment industry for blocking and suppressing spills and leakages on heat generating equipment such as projectors, light cans, barndoors, and similar equipment. Lighting decorators / engineers can use it to create shadows, form barn doors and adapt gobos. Used in situations where extreme heat might otherwise burn flags or cutters,. Also used in the construction industry for joining elastomeric insulation systems.
The surface to which the tape is applied should be clean, dry and free of any grease or oil. It should also be stored at 70°F / 50% relative humidity and out of direct sunlight.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 50mm wide.Technical Specifications
You might also like
Rosco Matte Black Cinefoil, 12"x50' Roll.
Noico Black 80 Mil 36 Sq Ft Car Sound Deadening, butyl automotive deadener restoration mat and Noise dampening insulation
Makita MAC2400 Big Bore 2.5 HP Air Compressor
Hosa DMT-414 DMX512 XLR3M Terminator
Satechi Aluminum Finish USB Numeric Keypad
ASUS VE278Q 27" Full HD 1920x1080 2ms DisplayPort HDMI DVI VGA Monitor