Inkjet Iron On Heat Transfer Paper for Black or Dark Fabric - 10 Sheets for Inkjet Printers

ITEMS YOU WILL NEED Prewashed white or light colored Cotton or Cotton/Polyester blend fabric or stretchable fabric like Lycra Heat Press or Iron (do not use steam) PillowcaseParchment paper Hard smooth surface: Do NOT use an ironing boardSTEP ONE PRINTING YOUR IMAGE 1) Bring paper to room temperature before printing. 2) Load transfer sheets into your printer so that the image is printed on the unlined (non-glossy) side. 3) Using your computer, select or design images to be transferred. Mirror or flip the image before printing. 4) Print image/design on paper using the following recommended print settings. *All technical information and recommendations are based on tests we have conducted. For laser printers not listed, we recommend following the manufacturers in5) Use scissors to cut around the transfer artwork to remove excess.STEP TWO TRANSFERRING THE IMAGE HEAT PRESS1) Preheat press to 350- 375 F. 2) Press fabric for 3-5 seconds to release moisture and remove wrinkles. 3) Place transfer face down (lined side up) on the fabric. 4) Place parchment paper over transfer 5) Set to medium pressure for best results. 6) Press for 20- 25 seconds. 7) Peel HOT for best results: wait 5 seconds then remove parchment and backing paper using a smooth, even motion. HAND IRON1) Preheat your iron to the Linen setting. Lay a pillowcase on the ironing surface. 2) Pre-iron the fabric to release moisture and remove wrinkles 3) Place printed transfer face down (lined side up) on the fabric. 4) Using FIRM, STEADY pressure, glide the iron in a circular motion over the entire transfer for 2 minutes. It is important to cover the transfer completely. 5) After ironing each section of the transfer, glide the iron once more over the entire transfer to heat evenly. 6) Peel HOT for best results: wait 5 seconds then remove parchment and backing paper using a smooth, even motion.