Industrial 48V DIN Rail Power Supply 120W + 12-Port DC Distribution Kit

Industrial 48V DIN Rail Power Supply 120W + 12-Port DC Distribution Kit

• 48V 2.5A 120W REGULATED OUTPUT, ADJUSTABLE 48-52V - Output is trimmable from 48 V to 52 V by front potentiometer with a live LED readout of the set voltage. The 48-52 V band is the PoE range: 48 V nominal for 802.3af/at, and the upper end of the band for equipment that expects 52 V at the injector. Output current 0-2.5 A continuous.
• POWERS A DIN-RAIL POE SWITCH OR ANY 48V DEVICE DIRECTLY - Wire the DC output straight into a PoE switch, injector or access point rather than stacking wall bricks in the cabinet. Screw-terminal output, no barrel jack, and the set voltage is visible on the display before you connect anything.
• INCLUDES A 12-PORT DC DISTRIBUTION MODULE - The bundle supplies power to up to 12 devices from one source, each on its own screw terminal. This is the part that is normally bought separately and wired by hand.
• PROTECTION SUITE WITH AUTO-RECOVERY - Overload, overcurrent and short-circuit protection use hiccup-mode recovery: the output re-establishes itself automatically once the fault clears, with no fuse to replace and no manual reset. 6 kV lightning surge protection on the AC input.
• -40 TO +85 C, FANLESS IP40 ALUMINIUM - No vents, no moving parts, IP40-rated housing, rated for unheated cabinets and outdoor enclosures. Vibration tested 10-500 Hz at 2 G, 60 minutes per axis. Operating humidity 20-90% RH non-condensing. MTBF over 100,000 hours.
• SNAP-ON 35 MM DIN RAIL MOUNTING, COMPLETE IN THE BOX - Standard 35 mm DIN rail fitting, with wall-mount brackets for cabinets without a rail. Ships with the supply, the 12-port distribution module, AC input cable, pre-stripped DC wires, screwdriver and manual. 110 x 81 x 45 mm (4.33 x 3.19 x 1.77 in), 0.56 kg.
• SCREW-TERMINAL WIRING THROUGHOUT - AC input and DC output land on captive screw terminals rather than barrel jacks, so the installation is field-serviceable and holds under vibration. Universal 90-264 VAC input, 47-63 Hz, no voltage selector and no converter needed. Start-up rise time 8 ms at full load.