Industrial 24V DIN Rail Power Supply 2A 48W + 12-Port DC Distribution Kit

Industrial 24V DIN Rail Power Supply 2A 48W + 12-Port DC Distribution Kit

• 24V 2A 48W REGULATED OUTPUT, ADJUSTABLE 22-26V - Output is trimmable from 22 V to 26 V by front potentiometer with a live LED readout of the set voltage, so the rail can be matched to cable drop, to a 25 V process load, or to equipment that wants slightly over nominal. Input 90-264 VAC, 47-63 Hz. Output current 0-2 A continuous.
• INCLUDES A 12-PORT DC DISTRIBUTION MODULE - The bundle supplies power to up to 12 devices from one source, each on its own screw terminal: controllers, sensors, media converters or network devices. This is the part that is normally bought separately and wired by hand.
• PROTECTION SUITE WITH AUTO-RECOVERY - Overload, overcurrent and short-circuit protection use hiccup-mode recovery: the output re-establishes itself automatically once the fault clears, with no fuse to replace and no manual reset. 6 kV lightning surge protection on the AC input.
• ADJUSTABLE RANGE SUITS BENCH AND PROCESS WORK - The 22-26 V range and the front potentiometer make this usable as a fixed-mount lab or plating supply, not only as a cabinet rail: set the voltage, read it off the display, leave it. Start-up rise time 8 ms at full load.
• SNAP-ON 35 MM DIN RAIL MOUNTING, COMPLETE IN THE BOX - Standard 35 mm DIN rail fitting, with wall-mount brackets for cabinets without a rail. Ships with the supply, the 12-port distribution module, AC input cable, pre-stripped DC wires, screwdriver and manual - nothing to source separately. 110 x 81 x 45 mm (4.33 x 3.19 x 1.77 in), 0.56 kg.