Imdinnogo 3D Printer Enclosure for BambuLab P1P/P1S/P2S/X1/X1C: 16.3 L x 18.1 W x 29.5 H inch PVC Laminated Polyester Storage Blackout Cover to Protection from Sunlight Dust Dirt Black

Imdinnogo 3D Printer Enclosure for BambuLab P1P/P1S/P2S/X1/X1C: 16.3 L x 18.1 W x 29.5 H inch PVC Laminated Polyester Storage Blackout Cover to Protection from Sunlight Dust Dirt Black

• It is a must-have 3D Printer Accessories. Compatible with Bamboo X1-carbon/ P1 series or part of resin 3d printing project, please make sure the size is you want. If your printer model is A1 Mini, search ASIN: B0GHM37FXK
• Size: 415x460x750mm/ 16.3*18.1*29.5in, cover is built to last, safe from tears and abrasion; also waterproof, Dustproof
• Easy to Use: There is a handheld on the top, Flaps on all four sides allow easy access to printer controls and ports
• Integrated, no Iron pipes to support, inner lining that's fireproof, keeps heat in and clean. For the resin printer, the little flaps on the bottom let you see the screen, and you can still have the air purifier attached, with flaps at the bottom so it can be folded in if you want to make sure the fans/vents have no obstructions
• If you need another spare accessory: 184×184mm print bed 257×257mm smooth pei h1h build plate - upgrade cleaning nozzle wiper brush - 2510 or hot end motor cooling fan and control board fan - extruder motor - x y z axis belt - gear assembly - AMS heated board - Hall switch board - ceramic heater or thermistor - 0.4mm nozzle - LED backlight board or LED DIY multi color light- screw kit etc, please welcome