INEFIL ER70S-6 MIG Welding Wire .035" — 10 lb Spool | Made in Italy | Low Spatter Solid Wire for Heavy Fab, Structural Steel & Multi-Pass Welding — AWS ER70S-6

INEFIL ER70S-6 MIG Welding Wire .035" — 10 lb Spool | Made in Italy | Low Spatter Solid Wire for Heavy Fab, Structural Steel & Multi-Pass Welding — AWS ER70S-6

• Made in Italy Since 1950 — Manufactured by INE SpA using European carbon steel and proprietary drawing processes — certifications used in shipbuilding, pressure vessel, and structural fabrication. Consistent diameter and copper coating on every spool
• Low Spatter — Higher manganese and silicon deoxidizer content means less spatter, smoother bead appearance, and minimal post-weld grinding. Requires shielding gas: C25 (75% Ar / 25% CO2) or 100% CO2. Polarity: DC+
• Smooth & Stable Arc — Tight dimensional tolerances and sealed spool packaging deliver consistent feed without bird-nesting. Feeds reliably in Miller, Lincoln, Hobart, ESAB, Eastwood, Forney, and most standard MIG setups
• All-Position Welding — Flat, horizontal, vertical, and overhead. Rated for single and multi-pass welding on mild steel and HSLA steels up to 510 MPa tensile. Suited for auto body, trailers, structural frames, tanks, boilers, and general fabrication
• AWS A5.18 Classified — Classified AWS A5.18 / EN ISO 14341-A. Third-party certifications include ABS, TÜV, RINA, DNV-GL, Lloyd’s Register, CWB and CE — the approvals required for professional, structural, and marine welding applications worldwide