Hongfa Replacement Roomba Front Caster Wheel, Fit IRobot Roomba i7 i7+ Plus 980 880 870 790 780 770 E5 E6 E7 500 600 700 Series Roomba Vacuum Replacement Parts

[ In The Box ]:

1 pcs Front Caster Wheel Replacement

1 pcs Free Cleaning Brush

[ Applicable Model ]: Irobot Roomba 500, 600, 700, 800 and 900 Series. (510 530 535 560 620 650 56708 770 780 880 etc.)

[ How to replace the Roomba Front Caster Wheel ]

1.Remove the front caster wheel by pulling firmly.

2.Ensure there is no debris inside the wheel cavity.

3.Push the replacement wheel into the wheel cavity until it clicks into place to re-install it.

[ How to Clean the Replacement iRobot Roomba Front Caster Wheel ] :

If the front caster wheel does not rotate, is squeaking, or falls out, use the following procedure to keep Roomba running at peak performance. It is recommended that the front caster wheel is regularly cleaned.

Step 1 : Pull firmly on the front caster wheel to remove it from the robot.

Step 2 :Spin the wheel by hand. If rotation is restricted, remove the wheel from its housing and remove debris from inside the wheel cavity.

Step 3 :Push firmly to remove the axle and remove it completely from the wheel.

Step 4 :Clear any debris or hair wrapped around the axle.

Step 5 :Wipe the wheel clean.

Step 6:Re-install the axle, ensuring that both sides of the axle snap firmly in place.

Step 7 :Re-install the wheel into the housing.

Step 8 :Reinstall the front caster wheel into the robot.

[ Important Notes ]:

This is not a iRobot Roomba OEM product and is not covered under any iRobot Roomba manufacturer's warranty. The iRobot Roomba brand names and logos are the registered trademarks of their respective owners. Any use of the iRobot Roomba brand name or model designation for this product is made solely for purposes of demonstrating compatibility.