High Temperature Metal Tweezers Nipper Tools Clean Sterilizer Pot Tool for Beauty Salon and Home use Tattoo Sterilizing Equipment

Specifications:
Package Weight: 596g
Size: 16.5 * 16.3cm / 6.5 * 6.4inch
Power: 100W
Voltage: AC220V / 110V / 50HZ / 60HZ
Temperature: 150°
Function: Suit For Nail Art Metal Tools Disfection
Instruction:
1. Place the sterilizer box on the flat desk.
2. Open the lid and put the silica sand into the liner. ( The amount of the silica sand can't be too much-not more than 80% of the liner capacity.)
3. Turn on the power switch and the heating indicator will be light, while the machine begin to heat.
4. After heating for 10 to 12 minutes, the tools that need to be disinfected should be inserted into the silica sand vertically.
5. After heating for 20 to 30 seconds, wear gloves to take out the tools for use.
6. When the temperature of the machine liner reaches 200℃, the heating indicator will be automatically turned off and the machine will stop heating. When the temperature of the machine liner reduces, the heating indicator will be light automatically and the machine will heat automatically.

Package Include:
1 x Nail Art Tools Sterilizer Box
1 x US Plug Adapter
1 x Bag Of Silica Sand

Note:
1. After use, immediately pull out the plug and turn off the power
2. It can't be used or stored in bathroom or other damp place.
3. When the machine is connected to the power, the user should pay attention to keep children away from the machine.
4. Don't expose the machine to water or other liquid. If it was into the water, you must immdiately turn off the machine and don't touch the water or machine.
5. Do not open the lid before turn off the power.