Hicarer Quartz Clock Movement High Torque, Black, 1-1/5" Total Shaft Length
Product Description
Hicarer Quartz Clock Movement High Torque, Black, 1-1/5" Total Shaft Length
- Long Shaft Fit: designed for DIY wall clock repair and replacement projects, this high torque quartz movement uses a 1-1/5 inch total shaft to reach selected thicker clock faces; Confirm your panel thickness, center-hole size, and thread length before ordering so the clock motor seats correctly and the hands can clear the dial during operation
- Large Dial Hands: the gold variant includes spade-style hands reaching about 12 inches, giving a broad wall clock face a readable, balanced look; Use the replacement hands for handmade timepieces, craft clocks, and dial restoration, then compare hand length and center-hole spacing with your existing clock before installation for a coordinated display
- Sweeping Operation: battery-powered quartz movement uses a sweeping second hand to support a quieter setting than a standard ticking movement; It fits bedroom, office, studio, and craft-workspace projects where a calm time display matters; Install one AA battery as specified by the movement and check the hands for free clearance before hanging the clock
- Repair Components: this clock mechanism replacement is supplied with the movement, hook, black hands, washers, nut, mounting hardware, and instructions; The parts help refresh a worn wall clock or build a DIY timepiece while reducing the need to source separate small hardware pieces; Review the package contents before starting your repair
- Careful Installation: aluminum hands can bend when pressed too hard, so place the hour hand first, keep the minute hand parallel, and press each part lightly; Secure the shaft and nut without overtightening, then check that the hands move freely around the dial; A size check before purchase helps avoid fit, alignment, and return issues
Clock movements battery clock mechanisms with 12 inch long spade clock hands
Features:
Total shaft length is 31 mm (1-1/ 5 inches); Thread length: 20.4 mm (4/ 5 inches); Jump second movement, suitable for 12 - 16 mm (12/ 25 - 5/ 8 inches) thickness clock panel
Application:
You can use the clock movement to repair, replace or make a clock, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Easy and simple design:
These component parts are easy to assemble together and the black metal hands can be painted with any color to match your clock.
Specifications:
Material: plastic and aluminum
Case size: approx. 55 x 55 x 16 mm (2.2 x 2.2 x 0.63 inches)
Hour hand length: total length is 216 mm/ 8.5 inch; Center hole to the tip is 203 mm/ 8.0 inch
Minute hand length: total length is 385 mm/ 15.2 inch; Center hole to the tip is 305 mm/ 12 inch
Power: 1.5V AA 1 x battery (not included)
Package includes:
1 x Quartz clock movement
1 x Close nuts
1 x Minute hand
1 x Hour hand
1 x Plastic washer
1 x Brass washer
1 x Brass nut
1 x Metal hook
Warm notice:
There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
Please confirm the size before buy it.
Technical Specifications
You might also like
Hicarer High Torque Clock Movement Mechanism with 230 mm/ 9.1 Inch Long Hand (Shaft Length 1-1/5 Inch/ 31 mm)
Hicarer High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 Inches Long Spade Hands and Hanger (31 mm (1-1/5 inches))
Hicarer High Torque Clock Movement Mechanism with 270 mm/ 10.6 Inch Big Clock Hands (Shaft Length 4/5 Inch/ 20 mm)
Mudder 24.6 mm/ 1.0 Inches Thread Length Long Spindle Quartz Clock Movement with 2 Hands for Dials up to 21 mm/ 0.8 Inches Thick
Hicarer DIY Large Clock Hands 3D Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories
Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 2 Long Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length. …
Hicarer High Torque Clock Movement Mechanism with 230 mm/ 9.1 Inch Long Hand (Shaft Length 9/10 Inch/ 23 mm)
Hicarer High Torque Clock Movement Mechanism with 270 mm/ 10.6 Inch Big Clock Hands (Shaft Length 9/10 Inch/ 23 mm)
Hicarer High Torque Quartz Clock Movement Replacement Parts with 208 mm/ 8.2 Inches Long Spade Hands and Hanger (20 mm (4/5 inches))
Mudder Long Spindle Clock Movement, 4/ 5 Inch Maximum Dial Thickness, 1-1/ 5 Inch Total Shaft Length