HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
Product Description
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
- Driver element: a-Si TFT active matrix
- Resolution (dots): 240RGB*320Dots
- Viewing Direction: 6 o’clock
- Pixel arrangement: RGB vertical stripe
- With PCB plate (including power supply IC, SD), compatible with 5110 interface
Product Description:
100% brand new and high quality
Type: touch panel
Size:2.8" SPI Serial
Display area:36.72(W)X48.96(H)mm
Size:8.5 x 4.8cm
Driver element: a-Si TFT active matrix
Pixel arrangement: RGB vertical stripe
Driver IC: ILI9341
Backlight: White LED
Viewing Direction: 6 o'clock
Color Depth: 262K/65K
Resolution (dots): 240RGB*320Dots
5V compatible, use with 3.3V or 5V logic
Need at least 4 IOs from your MCU
Package included:
1*240X320 Resolution 2.8" SPI TFT LCD Display Touch Panel
Note:
If you are using this LCD with a 5V device such as an Arduino, be aware that it doesn't work if WITHOUT level shifting to 3.3v logic. Please use level shifters from 5V to 3.3V, it will work then.
Technical Specifications
You might also like
HiLetgo 2.2 Inch ILI9341 SPI TFT LCD Display 240x320 ILI9341 LCD Screen with SD Card Slot for Arduino Raspberry Pi 51/AVR/STM32/ARM/PIC
PJRC Teensy 4.0 (Without pins)
HiLetgo 2.4" ILI9341 240X320 TFT LCD Display with Touch Panel LCD for Arduino UNO MEGA2560
HiLetgo 3.5" IPS TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560
MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE
KeeYees 3pcs BME280 Compatible with BMP280 Digital 5V Temperature Humidity Sensor Atmospheric Barometric Pressure Board IIC I2C Breakout for Arduino
DEPEPE 30 Pcs 40 Pin 2.54mm Male and Female Pin Headers for Arduino Prototype Shield
KeeYees ESP32 ESP-32S Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip CP2102 for Arduino (2PCS)
Teensy 3.6 (Without Pins)
PJRC Teensy 3.2