Hi-Contrast 15N20 Steel Barstock for Making Carbon Damascus Knives - 0.095" x 1-1/2" x 12"
Product Description
Hi-Contrast 15N20 Steel Barstock for Making Carbon Damascus Knives - 0.095" x 1-1/2" x 12"
- 15N20 is a bright and acid resistant metal commonly used for forging with high carbon steels to draw out the contrast in Damascus patterned billets for knives and swords.
- Its iron is alloyed with 0.88% carbon, 0.40% manganese, 2.0% nickel, and 0.10% phosphorus and silicon. (The number 15N7 may be written on the bar, this is the product SKU, not the nickel content)
- Dimensions are 0.095" x 1-1/2" x 12".
- Layer 15N20 with high carbon steels like 1080, 1095, 5160, etc. to forge Damascus, and etch with Ferric Chloride or electrolysis to bring out the contrast. The nickel in 15N20 resists the acid, remaining bright.
15N20 is a bright and acid resistant metal commonly used for forging with high carbon steels like 1080, 1095, etc. to draw out the contrast in Damascus patterned billets for knives and swords. Its iron is alloyed with 0.88% carbon, 0.40% manganese, 2.0% nickel, and 0.10% phosphorus and silicon.
Technical Specifications
You might also like
RMP Knife Blade Steel - 1095 High Carbon Annealed Steel, Knife Making Billet, 1.5 Inch x 12 Inch x 0.187 Inch
MG Chemicals 415 Ferric Chloride Copper Etchant Solution, 945mL Liquid Bottle
Texas Knifemakers Supply - 1095 High Carbon Annealed Forging Steel Barstock for Knife Making - 1/8" x 1-1/2" x 12"
RMP Knife Blade Steel - High Carbon Annealed, 1095 Knife Making Billets, 1.5 Inch x 12 Inch x 0.187 Inch, 3 Pack
1095 Steel barstock for Forging and Knife Making 1/8" x 1-1/2" x 12" Knife Blade Steel USA Made
Texas Knifemakers Supply - 1080 High Carbon Annealed Forging Steel Barstock for Knife Making - 1/8" x 1-1/2" x 12"
RMP Knife Making Blank - 1074/1075 High Carbon Annealed Steel Billets, 1.5 Inch x 12 Inch x 0.187 Inch
Texas Knifemakers Supply - 1080 High Carbon Annealed Forging Steel Barstock for Knife Making - 3/16" x 1-1/2" x 12"
Texas Knifemakers Supply African Blackwood Knife Handle Scales (Each Pair is Unique) 5" x 1-1/2" x 3/8"
Knife Steel 1084 Annealed 3/16" x 1-1/2" x 12" Knife Blade Steel for Custom Knifemaking USA Made