Glass Cutting Kit, Cutter with Glass Drill Bits for Drilling Holes in Bottles, Blocks and Quarter Plate. Professional 2-in-1 Cutter Tool Scorer and Breaker, Step-by-Step Instructions & Online Videos

Glass Cutting Kit, Cutter with Glass Drill Bits for Drilling Holes in Bottles, Blocks and Quarter Plate. Professional 2-in-1 Cutter Tool Scorer and Breaker, Step-by-Step Instructions & Online Videos

• GLASS CUTTING KIT- Watch Glass Cutting Videos Read Tips And Instructions and Download User Guide. Must Soak Glass Cutting Tool Wheel in Glass Cutting Oil, Run Wheel Up And Down A Board To Check Wheel is Spinning Freely So It Can Score Glass Evenly If Glass Cutting Blade Stops It Will Not Score. Glass Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Stick and Drag Across And That Will Not Make a Good Score. Practice On Scrap Glass Before Making Final Cut To Ensure You Have The Technique.
• HOLD GLASS CUTTER TOOL – Handles Of Glass Cutter Tool Are Only For Squeezing Glass To Break, Do Not Hold Glass Cutter by Handles When Scoring. Hold Close To The Wheel for Control And Pressure on Glass Scorer. The Technique is to Create A Small V In Surface Of Glass Sheet. Scoring Way Too Hard Or Without Oiling Wheel Leaves A Wide Groove And White Dusty Line that Will Not Break On The Line Instead Of A Shallow V, The Perfect Glass Score Must Be Just Firm Enough To Leave the V Score in Glass.
• CUT STRAIGHT LINE IN GLASS – Place Glass Sheet On A Board At Waist Height, Scoring Glass on A Soft Carpet, Scoring Too Hard or More Than Once Will Cause Glass To Shatter When You Go to Break Glass. Draw A Line On Glass With A Marker, Follow Line By Pulling Cutter Towards You, Never Push Away, Watch The Back Of The Glass Cutter Wheel to Keep on Line or Use Flat Side Of Glass Cutting Wheel To Run Along A Very Smooth Straight Edge Guide At Least 2mm Thick, Guide Can Be Taped Down To Prevent Moving.
• GLASS DRILL BIT – 3/16” ¼” ½” Drill Bit For Glass Drill Bit For Bottles, These Glass Cutting Drill Bits For Drilling Holes In Glass Are To Be Used Wet, Glass Drilling Bits Will Also Drill Holes In Porcelain Tile So Not Just Drill Bits For Glass Sheet Also A Drill Bit For Glass Bottles And Drilling Holes In Glass Blocks For Making Wine Bottle Lamps And Lights. The ½” Glass Drill Bit is the Perfect size for Tree Lights to Push Through. On Flat Surfaces the Guides can be used To Hold Bits Straight
• TILE DRILL BITS – 3/16 Tile Drill Bit ¼ Tile Drill Bit Spear Point Tile and Glass Drill Bits Can Be Used For Drilling Holes In Glass At Low Speed In A Drill Press Is Best. Drill Holes In Clay Pots Drill Holes For Drainage in Pots Drill Holes In China Plates And Cups. Build A Wall Around Area With Plumbers Putty Fill With Water To Create A Well Of Coolant. These Tungsten Pointed Tile Drill Bits can be used for Drilling Holes in Ceramic Tiles For Screw Holes for Grab Bars and Shower Doors.